Welcome, Sunday , Nov , 18 , 2018 | 17:19 IST

  • Screen Reader
  • Skip to main content

Current Size: 100%

Materials Processing & Microsystems Laboratory

The Center for Advanced Materials Processing (CAMP) at the Central Mechanical Engineering Research Institute (CMERI) was created in 2005 to address the challenges in the area of advanced materials. The thrust area of work focuses on experimental research and development in nanomaterials processing for different applications. It comprises facilities to synthesize and characterize various functional nanomaterials. Recently, the centre is focused on the development of Dye Sensitized Solar Cell (DSSC), nanohybrid materials for tissue engineering, structural nanocomposite materials for cutting tools and strategic application, opto-electronic materials for sensor of advanced materials including composites, energy storage and devices, Laser material processing, Fluoride filter for drinking water.

Activities:

Title of the event

Duration

Place

National Conference on Advanced Functional Materials Processing and Manufacturing (NCAFMPM-2017)

February  02- 03, 2017

CSIR-CMERI, Durgapur

National Workshop on Machining & Machinability of Advanced Materials (NWMMAM-2016)

September 29- 30, 2016

CSIR-CMERI, Durgapur

National Workshop & Training Programme on Investment Casting Process Technology (NWIC-2016)

September 01- 02, 2016

CSIR-CMERI, Durgapur

National Conference on Investment Casting Process Technology (NWIC- 2015)

January 14, 2015

CSIR-CGCRI, Kolkata

National Seminar on Advanced Functional Materials(NSAFM-2013)

January 24, 2013

CSIR-CMERI, Durgapur

International Conference on Investment Casting (ICIC- 2010)

January 22-24, 2010

CMERI, Durgapur

National Workshop & Training Programme on Investment Casting

September 17-20, 2007

CMERI, Durgapur

National Workshop on Machining & Machinability of Advanced Materials

March 29-30, 2007

CMERI, Durgapur

National Conference on Investment Casting (NCIC- 2006)

December 28-29, 2006

Osmania University, Hyderabad

National Workshop & Training Programme on Investment Casting

September 14-19, 2006

CMERI, Durgapur

National Symposium on Investment Casting (NSIC- 2006)

January 06-07, 2006

Sarat Sadan, Howrah

9th Japan-India Joint seminar on Manufacturing Science of Advanced Composites (ACM-9)

February 16-21, 2004

Tokyo, Japan

National Conference on Investment Casting (NCIC- 2003)

September 22- 23, 2003

CMERI, Durgapur

Division Head

  • Dr. Nilrudra MandalPh.D (Engineering)

    Senior Scientist

    View Details

    Qualification: Ph.D (Engineering)

    Specialisation: Nano structured Composites & Ceramics, Mechanical behavior study of materials ,Statistical Modeling & Optimization

    Phone: 9434021941 / +91-343-2605844

    Email: n_mandal[at]cmeri[dot]res[dot]in

Scientists

  • Dr. Nripen ChandaPhD

    Senior Scientist

    View Details

    Qualification: PhD

    Specialisation: Chemical Science

    Phone: 0343-6452134

    Email: n_chanda[at]cmeri[dot]res[dot]in

  • Dr. Poulomi RoyPh.D.(I.I.T. Kharagpur), Post-doc (Germany)

    Senior Scientist

    View Details

    Qualification: Ph.D.(I.I.T. Kharagpur), Post-doc (Germany)

    Specialisation: Chemistry, Materials Science, Nanotechnology

    Phone:

    Email: p[dot]roy[at]cmeri[dot]res[dot]in

  • Dr. Prosenjit DasPh.D (Mech. Engg.), M.Tech (Metallurgical & Materials Engg.), B.Tech (Mech. Engg.)

    Senior Scientist

    View Details

    Qualification: Ph.D (Mech. Engg.), M.Tech (Metallurgical & Materials Engg.), B.Tech (Mech. Engg.)

    Specialisation: Materials and Manufacturing

    Phone: +91-343-6452373

    Email: prosenjit[at]cmeri[dot]res[dot]in

  • Dr. Abhiram HensB.Tech, M. Tech, PhD (Engineering Science)

    Scientist

    View Details

    Qualification: B.Tech, M. Tech, PhD (Engineering Science)

    Specialisation: Chemical Engineering

    Phone: +91-343-6452158 / 6510419

    Email: a_hens[at]cmeri[dot]res[dot]in

  • Dr. Ranajit GhoshPhD (Science)

    Scientist

    View Details

    Qualification: PhD (Science)

    Specialisation: Semiconducting Quantum dot, nanostructures and thin film for gas sensor, optoelectronics, CNT-epoxy light weight composites

    Phone: +91-343-6452073

    Email: r_ghosh[at]cmeri[dot]res[dot]in

  • Dr. Ravi Kumar ArunB.Tech-M.Tech Dual Degree in Chemical Engineering

    Scientist

    View Details

    Qualification: B.Tech-M.Tech Dual Degree in Chemical Engineering

    Specialisation: Microfluidics

    Phone: +91-343-6510419

    Email: rk_arun[at]cmeri[dot]res[dot]in

  • Dr. Shitanshu Shekhar ChakrabortyPh.D (Engineering)

    Scientist

    View Details

    Qualification: Ph.D (Engineering)

    Specialisation: Manufacturing Science and Engineering

    Phone:

    Email: ss[dot]chakraborty[at]cmeri[dot]res[dot]in

  • Dr. Sivaprakash SundaresanPh.D.

    Scientist

    View Details

    Qualification: Ph.D.

    Specialisation: Chemical Engineering, Materails Science

    Phone: +91-343-6452206

    Email: s_siva[at]cmeri[dot]res[dot]in

Technical Staffs

Others

Dr. Subhra Samamta

DST Inspire Faculty Fellow

Pages

Service Name Description Service Type
Micro Hardness Tester Instrumental Facility Academic / Internal rate (per sample in INR) Charges for External Users (per sample in INR) Micro Hardness (Vickers) 25 gm - 15 kg upto 1000.00 1500.00   Analysis/Testing/Calibration
Quantum Efficiency Measurement System Instrumental Facility Academic / Internal rate (per sample in INR) Charges for External Users (per sample in INR) Quantum Efficiency Measurement System IV Measurement per hr. slot 5000.00 6000.00   QE Measurement per hr. slot 5000.00 6000.00   Analysis/Testing/Calibration
UTM Instrumental Facility Academic / Internal rate (per sample in INR) Charges for External Users (per sample in INR)   UTM (50 kN capacity) for Tensile, Compression and Bending Test of each sample Number of sample = 01 1000.00 2000.00 Number of samples = 03 2000.00 2000.00   Analysis/Testing/Calibration
FTIR Instrumental Facility Academic / Internal rate (per sample in INR) Charges for External Users (per sample in INR) FTIR (for 01 sample) 1000.00 2000.00 (for 03 samples) 2500.00 4000.00 Analysis/Testing/Calibration
UV-VIS-NIR Instrumental Facility Academic / Internal rate (per sample in INR) Charges for External Users (per sample in INR) UV-VIS-NIR (Min. 03 samples)   Numbers of samples = 01 1000.00 2000.00 Number of Samples = 03 2500.00 4000.00 Analysis/Testing/Calibration
Thermal Analyzer Instrumental Facility Academic / Internal rate (per sample in INR) Charges for External Users (per sample in INR) Thermal Analyzer (Min.03 samples) TG-DTA 2700.00 4000.00 TG-DSC 2700.00 4000.00 Analysis/Testing/Calibration
Automated Gas Sorption Analyzer Instrumental Facility Academic / Internal rate (per sample in INR) Charges for External Users (per sample in INR) Automated Gas Sorption Analyzer (Min. 03 samples)     BET Surface Area (11 points) 1500.00 2000.00 BET Isotherm (Surface Area, Pore Size, Pore Radius, Pore Vol for 20 points) 2500.00 3500.00 BET Isotherm (Surface Area, Pore Size, Pore Radius, Pore Vol for 40 points) 4000.00 5000.00... Analysis/Testing/Calibration
  • Establishing the process technology for near net shape manufacturing of Metal Matrix Composites (MMC) components through Investment Casting.
  • Improvement of Cermets of WC-Co system by reinforcing with TiCN prepared through extended thermal plasma route
  • Nanocomposite ceramic cutting tool development for high speed machining
  • Product development through different Rapid Prototype (SLA, SLS, FDM) integrated-Investment casting process and delivered to different Industries
  • Technology of Ceramic Shelling process on expandable pattern transferred to three Industries
  • Technology of Hydroxyapatite biomaterials from natural resourced bio-waste like fish scale and egg shells
Facility Type:
Measuring Machines
Optical Microscope with Image Analyzer
Facility Type:
Optical Microscope with Image analyzer
Tool & Cutter Grinder
Facility Type:
Field Emission Scanning Electron Microscope (FESEM) with attached EDS and in-situ deformation Stage
Lathe
Facility Type:
Field Emission Scanning Electron Microscope (FESEM) with attached EDS and in-situ deformation Stage
Airjet Erosion Tester
Facility Type:
Rotating Bending Fatigue testing Machine
Scratch Tester
Facility Type:
Optical Microscope with Image analyzer
UTM
UTM
Facility Type:
Field Emission Scanning Electron Microscope (FESEM) with attached EDS and in-situ deformation Stage
FTIR
Facility Type:
Field Emission Scanning Electron Microscope (FESEM) with attached EDS and in-situ deformation Stage
Surface roughness
Facility Type:
Optical Microscope with Image analyzer
UV-VIS-NIR
Facility Type:
Rotating Bending Fatigue testing Machine
Zeta Sizer
Facility Type:
Automated Gas Sorption Analyzer
Facility Type:
Field Emission Scanning Electron Microscope (FESEM) with attached EDS and in-situ deformation Stage
Thermal Analyser
Facility Type:
Scanning Electron Microscope (SEM) along with Energy Dispersive Spectroscopy (EDS)
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
Image CAPTCHA
Enter the characters shown in the image.

Last updated : 4 Oct, 2018