Welcome, Thursday , Mar , 28 , 2024 | 13:53 IST

Home

CSIR - CMERI

সিএসআইআর - সেন্ট্রাল মেকানিক্যাল ইঞ্জিনিয়ারিং রিসার্চ ইনস্টিটিউট, বিজ্ঞান ও প্রযুক্তি মন্ত্রণালয়, ভারত সরকার सीएसआईआर - केंद्रीय यांत्रिक अभियांत्रिकी अनुसंधान संस्थान, विज्ञान और प्रौद्योगिकी मंत्रालय, भारत सरकार CSIR - Central Mechanical Engineering Research Institute, Ministry of S&T, Govt. of India
Mobile nav
Last updated : 7 Jul, 2017

Four Ball Tester

Four Ball Tester

The Four Ball Tester is a quality check instrument for lubricants and additives. The unique sample configuration of three bottom balls and one top ball makes a very stable and a repeatable contact in-turn, allowing tests results to be very repeatable. This instrument is used to determine Wear Preventive properties (WP), Extreme Pressure properties (EP) and friction behavior of lubricants.

A rotating steel ball is pressed against three steel balls firmly held together and immersed in lubricant under test. The test load, duration, temperature and rotational speed are set in accordance with standard test schedule. In Wear Preventive (WP) tests – also called Anti Wear (AW) tests – the average scar diameter on the bottom three balls is reported. The size of the scar shows the ability of the lubricant to prevent wear. A larger diameter indicates poor wear preventive property while a smaller indicates superior wear preventive property. In Extreme Pressure (EP) tests the lubricant is subjected to load that is increased in specified steps after every run. This increase in loading is continued till a load is reached where the lubricant fails. The failure of lubricant is indicated by welding of the bottom three balls to the top ball. The load at which welding occurs is the index of extreme pressure property of the lubricant.