Welcome, Monday , Sep , 20 , 2021 | 20:10 IST

  • Screen Reader
  • Skip to main content

Current Size: 100%

Testing/Calibration

  • In-Situ Cover testing of concrete structure

    A cover meter locate rebars and measure the exact concrete cover. The pulse- induction method is based on electromagnetic pulse induction technology to detect rebars.

  • Rebound hammer testing

    The Concrete Rebound Hammer is principally a surface hardness tester for estimating the compressive strength of in-place concrete.

  • Wire Rope Testing

    Test is carried out to determine the breaking force, yield strength, elongation and modulus of elasticity of wire ropes used in mines.

  • Compression Testing

    • Compression tests are used to determine a material's behavior under applied crushing loads, and are typically conducted by applying compressive pressure to a test specimen.

  • Bend- Re Bend test

    • The bend test is a simple and inexpensive qualitative test that can be used to evaluate both the ductility and soundness of a material.

  • NABL Accredited Tensile Testing

    A tensile test applies tensile (pulling) force to a material and measures the specimen's response to the stress.

  • Rotating Bending Fatigue Testing

    Rotating Bending Fatigue Testing is carried out as per BS 3518.

  • NABL Accredited Low cycle and High Cycle fatigue Testing

    Fatigue testing is carried out over the samples of structural steels to generate fatigue life and crack growth data, to demonstrate the safety of a structure that may be susceptible to fatigue.

  • Calibration of Force Proving Instrument

    • It is applicable to force-proving instruments in which the force is determined by measuring the elastic deformation of a loaded member or a quantity which is proportional to it.

  • BioLogic SP-150 Potentiostat / Galvanostat

    Cyclic Voltammeter and Corrosion inhibition study

    Features
    Current Range: 10 µA to 1 A

Pages